نتایج جستجو برای: Argon welding

تعداد نتایج: 24290  

Journal: :international journal of advanced design and manufacturing technology 0
ali moarefzadeh mehdi ahmadi najafabadi

in this paper, thermal effect of plasma arc welding is investigated, and temperature field of ferrite stainless steel is acquired. thermal effect of plasma arc and subsequently the generated temperature field in the work piece is the key for analysis and optimization of this welding process, which is the main goal of this paper. finite element simulation of welding process by simplec method and...

Journal: :Dental materials journal 2012
Yasuko Takayama Rie Nomoto Hiroyuki Nakajima Chikahiro Ohkubo

The purpose of this study was to evaluate the effects of the rate of argon gas flow on joint strength in the laser-welding of cast metal plates and to measure the porosity. Two cast plates (Ti and Co-Cr alloy) of the same metal were abutted and welded together. The rates of argon gas flow were 0, 5 and 10 L/min for the Co-Cr alloy, and 5 and 10 L/min for the Ti. There was a significant differen...

2014

Process This chapter presents the principle of tungsten inert gas (TIG) welding process besides important components of TIG welding system and their role. This process is also known as gas tungsten arc welding (GTAW) process. Further, fundamentals of heat generation, arc stability and arc efficiency have also been described. Additionally, comparison of argon and helium as shielded gases has bee...

2012
Chandresh. N. Patel S. J. Chaudhary

Welding is a manufacturing process, which is carried out for joining of metals by Metal Inert Gas (MIG) welding. This is the one types of Gas Metal Arc Welding (GMAW), in which Argon and Helium is used as a inert gas. Shielding gas Argon and Helium is used and consumable electrode is used which also plays role of conductor. MIG welding is versatile, gives very little loss of alloying elements a...

Journal: :IEEE Trans. Instrumentation and Measurement 2001
Pengjiu Li Yu-Ming Zhang

During arc welding, the arc heats and melts the workpiece as heat flux. When the welding current is given, the distribution and the intensity of the heat flux are determined by the length of the arc. The measurement and control of the arc length are fundamental in robotic and automated welding operations. Length of welding arc determines the distribution of the arc energy and thus the heat inpu...

Journal: :journal of modern processes in manufacturing and production 0
javad shahbazi karami faculty of mechanical engineering, shahid rajaee teacher training university, tehran, iran hamed bakhtiarizade department of mechanical engineering, iran university of science &technology, tehran, iran mohsen shahmoradi department of mechanical engineering, maleke-ashtar university of technology, isfahan, iran

development of new technologies and combined with creativity and innovation, plays the fundamental role in developing of any community′s value. thus, in this research the design and production of hydroforming device was introduced. one of the best and most efficient technologies in the world of metal forming is wind turbine blade producing with hydroforming method which seems as an innovative m...

2013
Jaison Peter Anoop Kumar

Gas metal arc welding (GMAW) is a highly efficient and fast process for fabricating high quality weld. High quality welds are fabricated by proper selection of consumable includes gas and filler metals. The optimum flow rate of gas will ensure the proper quality of weld. In this project, a fluid flow behavior of different flow rate is modeled and the change quality will be studied. KeywordsHydr...

2010

Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...

2000
P. J. Li

Sensing plays a key role in automating and controlling welding processes. Although arc light sensing has advantages over through-the-arc sensing for arc length control and seam tracking, the current technology relies on experimental data and lacks theoretical foundation. To improve measurement accuracy, this work addresses the theoretical foundation for arc light sensing. A theoretical model ha...

2014
Rakesh Sharma Jagdeep Singh

The aim of this study is to investigate the optimization process parameters for Metal inert gas welding (MIG). In the present work, bead-on -plate welds were carried out on MS 5986 Fe 410 carbon steel sheets using Gas Metal Arc Welding (GMAW) process. In this present investigation ER70S-6 solid wire having 1.2 mm diameter was used as an electrode with direct current electrode positive polarity....

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید